|
I finally got my car aligned today, which helped shed some light on the issues. It turns out that I had -2.5 deg camber in the front! That would definitely cause it to be much closer to the strut.
I had put 3mm spacers to get it to clear on the way to the shop, but I'm thinking I'll take those out now that I have a lot more clearance.
On a side note, it was mentioned to me by the shop that I shouldn't use OEM lug nuts with aftermarket wheels. Apparently "normal OEM" nuts are rounded, whereas aftermarket wheels have conical seats. My understanding is that the BRZ stock lug nuts are conical, so I should be good, but wanted to make sure.
|