|
You could replace the OEM rubber induction pipe with a alloy induction pipe.
I've seen a alloy intercooler pipe gerry rigged to fit, the breather was ducted into a 20mm? hole and a grommet was used to seal it.
4 hose clamps, 2 short silicon straights and "whalla", more induction noise
Ut aslo has the snorkel mod as well and no resonator, but that picks up only a small increase in noise, and only really heard when standing right at the front bumper.
I have a Mishimoto induction hose on mine to clean up the bay after removing the cabin noise maker, there was a slight increase of induction noise from that, sans the resonator as well as the snorkel mod.
You could always get a reinforced silicone straight to 90° pipe and drill and grommet that.
Just like a perrin or Mishimoto induction hose, but 1/3 the price.
I went with the Mishimoto one because alcohol and Ebay were involved in the matter.
|