Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

GarrettGalway · 08-12-2018, 12:39 AM

No I did not re calibrate the MAF tables I am looking into the VGI software for that as everyone says its probably the best thing to use just gotta figure out how to use that as well haha. Also my LTFT are always negative -8 to -10 at idle and -5 to -7 on decel, How do I see commanded afr? Also would it be best for me to have a pro do the MAF scaling or is it easy enough once I get the VGI going? Reading up on your MAF scaling post now Steve. Thanks for the input and help guys!

08-12-2018, 12:39 AM	#4
GarrettGalway Junior Member Join Date: Oct 2017 Drives: 2014 Subaru Brz Location: Toronto, Ontario Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	No I did not re calibrate the MAF tables I am looking into the VGI software for that as everyone says its probably the best thing to use just gotta figure out how to use that as well haha. Also my LTFT are always negative -8 to -10 at idle and -5 to -7 on decel, How do I see commanded afr? Also would it be best for me to have a pro do the MAF scaling or is it easy enough once I get the VGI going? Reading up on your MAF scaling post now Steve. Thanks for the input and help guys! Last edited by GarrettGalway; 08-12-2018 at 01:40 AM.