Quote:
Originally Posted by finch1750
This has been common confusion for a long time now.
The Whiteline instructions are incorrect for the twins. The 16mm Whiteline is for the top hole on our cars. SPC 81280 is also 16mm and for the top hole. The bottom bolt is 14mm and is SPC 81305 or 81260.
There is a lot of info compiled in this thread https://www.ft86club.com/forums/showthread.php?t=103609
If the top hole is slotted there is an increased chance of slipping using an eccentric bolt. I run SPC 81260 in the bottom hole and the OEM crash bolt in the top slotted hole on both sets of coilovers I have ran with slotted upper holes without issue. |
Thank you for your detailed answer. I really appreciate it. I feel like an idiot for mixing this up!
I am using 81305 14mm EZcam in lower, and the lower OEM bolt in the upper.