Quote:
Originally Posted by Leonardo
I am confused? Are the 16mm SPC and 16mm Whiteline parts different? If it is this whiteline product, KCA416?
https://www.rallysportdirect.com/par...ber-bolts-16mm
"On this page, you are looking at the Whiteline 16mm Camber Bolts. These bolts have been designed to provide you with more camber adjustment from the lower suspension mounting point."
The SPC camber bolts that look the same (81280), list the other mounting hole.
https://www.rallysportdirect.com/par...m-camber-bolts
"The SPC EZCam XR 16mm Camber Bolts have been designed to allow for either positive or negative camber correction of up to 1.75 degrees. These have been designed to be used with non-slotted Mcpherson struts. These are used in the upper strut to spindle bolt where the factory design uses two bolts to connect the strut to the spindle." |
The bolts are sold by whiteline but are engraved with spc
Sent from my HTC U11 life using Tapatalk
__________________
Please only adult answers.
I'm stupid, retarded, a fkn idiot, and I will kill myself after a couple answers, I already know this (thanks to the interwebs and its logic) so feel free to leave those responses out, thanks.
|