Quote:
Originally Posted by finch1750
Is you top strut mount slotted? and are the Whiteline bolts you have for the top or bottom hole?
|
I am confused? Are the 16mm SPC and 16mm Whiteline parts different? If it is this whiteline product, KCA416?
https://www.rallysportdirect.com/par...ber-bolts-16mm
"On this page, you are looking at the Whiteline 16mm Camber Bolts. These bolts have been designed to provide you with more camber adjustment from the
lower suspension mounting point."
The SPC camber bolts that look the same (81280), list the other mounting hole.
https://www.rallysportdirect.com/par...m-camber-bolts
"The SPC EZCam XR 16mm Camber Bolts have been designed to allow for either positive or negative camber correction of up to 1.75 degrees. These have been designed to be used with non-slotted Mcpherson struts. These are used in the
upper strut to spindle bolt where the factory design uses two bolts to connect the strut to the spindle."