View Single Post
Old 08-03-2018, 06:21 PM   #16998
MrClean614
Member
 
Join Date: Oct 2016
Drives: 981 Boxster, ‘24 Emira
Location: Powell, OH
Posts: 67
Thanks: 14
Thanked 6 Times in 5 Posts
Mentioned: 0 Post(s)
Quote:
Originally Posted by wolffbite View Post
Stock wheels + tires are about 41.4 lbs.

My wheels and tires are 18.3 lbs + 23.94 lbs = 42.24 lbs

So less than a pound heavier on each corner.

I have the Eibach Pro-kit for about 1" of drop all around. Very comfortable for daily driving and not so low that you can't deal with speedbumps and driveways. Currently have SPC rear LCAs, SPC camber bolts, and whiteline tophats on order so that I can get my alignment 100% dialed in.
Nice!

That’s what I’d look for in terms of drop and I’ve had good experiences with Eibach product. How far off was the alignment before the other parts?

I’m wondering, since I’ve lowered cars an inch or so without having to go to that measure. Granted the camber may have been a bit out of spec but not by much (-1* to -1.25*).

Appreciate the education.
MrClean614 is offline   Reply With Quote