Quote:
Originally Posted by carlovestela
So can i disable my turn signal in front bumper?
Cause i have the morimoto headlights which have turn signal built in.
What led white light you recommend?
|
If you're running aftermarket headlights with integrated turn signals, the "clean" or "proper" way to wire them was to depin the turn signal wire and add it to your headlight harness (instead of a wire splice). In that sense, you're not necessarily "disabling" the turn signal, just relocating the wire.
White LED light model depends on the bulb/size you're running. I like to use JDM Astar these days for my LED lights.
If you're trying to re-use the turn signal housings, you'll need a 7444 bulb. You can either re-pin/splice from your fog light harness if you want to utilize the fog light switch. Or, you can might also be able to re-utilize the low running circuit on the front turn signal harness (since the front turn signal 7444 bulbs are dual-filament), but I think that would make your fog lights flash when your signals are blinking.