Quote:
Originally Posted by EdBoy
does that work?
|
It doesn't hurt that's for sure. Main thing is just always keeping iat's low as possible.. especially beating it for 10-15 mins on a circuit hard. I've done bottom of intake runners on my Boss 302 Manifold for my coyote as well. I will do the Boxer intake when I have more time. You won't feel it in the but dyno by any means.
For the stock Ft86 air box though I would say 15-20 degrees cooler if I had to bet. I didn't do this but if you wanted to test a base test before vs after. Drive around to heat the air box up. Detach the air box lid and temp gun the inside for reference. Gold tape the outside and do the same test, pull the lid off and temp the inside again. Not a bad price for the rolls for a quality product. Many people have used this stuff on all kinds of apps. I'm removing exhaust shields on my Fiesta for ex and using big sheets of dei for the floor boards in certain areas. Drop weight and still a little something to take some of the heat away.