Quote:
Originally Posted by Trueweltall
I am in the process of installing them right now, just got my car up on jack stands. I will be done and aligned by Saturday afternoon if all goes well. Aiming for -1.5 front, -1.0 rear with zero toe. Only have camber bolts for the bottom hole on the front struts, don't want to mix and match a 14mm bolt into the top 16mm hole for more camber so I will be happy with -1.5 in the front.
|
Cool, can't wait to see the finished product! Although, I don't think you will be able to get -1.0 rear camber without lower control arms. Anytime you lower the car it will naturally gain camber the front might not change much. I suspect you will be at -1.7 or -1.8 or so for rear camber since it is a mild drop which is perfectly fine for DD as long as the toe is zero'd out