Quote:
Originally Posted by Grady
Had a similar issue with mine. Fuel pressure and E content not stable. Causing check engine light and other strange things. Turned out it was water ingress into the box. Just assumed since it was designed to be installed in an engine compartment it would have an water IP rating of 4 or so. Come to find out its rating is 0. Be carful where you mount it. They are starting to use a hydrophobic coating on board now to help. Changed my mounting position to the front of the fuse box with the wire harness pointing straight down. I just hope the box isnt already damaged beyond repair
|
I remember your suggestion, i have since switched to a nonvented hood and moved the dbox. I’ll relocate once more further away from anywhere that might see moisture to see if it helps. Thanks again.
Quote:
Originally Posted by CSG Mike
That depends.
Are you logging the DI or PI fuel pressure?
|
I will log again and see if this is the issue. I have the MK1+ upgrade and i see a drop in ethanol content in the app everytime im at 2k. Besides this, Delicious has been super helpful in pinpointing any issues ive had.