Quote:
Originally Posted by Razorlor
Right, if it was operating normally, you would expect 0 volts, as there is no difference between the two.
And yes, if the fuse is blown you would see a 12v drop at the fuse.
|
a video is worth about 10,000 words.
[ame]https://www.youtube.com/watch?v=zZoeBcdFhCA[/ame]
I don't understand why i would see 12v to that post on the starter from the positive battery terminal BUT there is definitely continuity across the links. Testing to each nut shows no voltage and the continuity tester beeps and goes to zero.