Quote:
Originally Posted by AxisPower
I was just trying to make the point that the rear lower control arm, which I posted a picture of, doesn't have issues with loosening up like the toe arms because it essentially has two clamps vs the toe arm which only has one.
|
The toe arm has two clamps as well... if you compare it to the LCA, the black barrel of the toe arm is the same part as the threaded rod with the nut on it between the arm and the rod end. Instead of clamping into the arm, it clamps to the other rod end. Same effect though, and like someone else mentioned, for the toe to change both clamps have to be loose enough for the barrel to rotate, in theory you only have to stop one end from rotating to stop coarse adjustments from happening. They run two so that the movement of the rod end at the other end can't cause a tiny change in toe.