[gtpvette]

After finishing up on the exhaust,, spent some time on the hood scoop. I glassed up some blocks underneath so I can recess the 9 screws holding it in place. Installed the Riv-nuts in the hood, as a sidebar a couple of them dimpled the hood a bit. I also bondo'ed the scoop and put on some crappy Dupli-Color high build primer. The primer is crap as it wont sand,, just loads up the paper.

Then for the 'pièce de résistance' I tried to wrap it a mat black vinyl. What a total failure. Never tried wrapping before and only bought enough for 1 try. What I got right looked pretty good,,, melting holes in it with the heat gun not so good.

I ordered enough for 4 more tries.