Quote:
Originally Posted by Ultramaroon
Did you remove the wheel speed sensors before you pulled the axles out of the hubs?
If not, they are toast. The magnetic disks on the axles will also be bent. Look for the service manuals in my sig line.
|
Nothing I read/watched said anything about removing wheel speed sensors. Just had to unbolt the 5 bolts (4 on the one side) for the hub, shock, endlink, and attachment point (and the headlight leveler on the one side). Then simply swap in the new lower control arm and reattach the bolts (and use the new bolts for the hub assembly).
This is the main video I used:
[ame="https://www.youtube.com/watch?v=ziMhyGgr7tE&index=2&list=PL_h3HQ482-IgYhKK5AmOuYerTqfZ5WZQ5&t=0s"]https://www.youtube.com/watch?v=ziMhyGgr7tE&index=2&list=PL_h3HQ482-IgYhKK5AmOuYerTqfZ5WZQ5&t=0s[/ame]
I watched several other videos, and they all basically followed the same template. None of them even mentioned the wheel speed sensor.