[SuperTom]

Originally Posted by gtengr

Are hollow sway bars available? I haven't looked around that much, but recall the ones I saw were solid.



Seibon hood weight gain is 6 lbs. Seibon CSL-style trunk is a loss of 2.4 lbs.

http://www.ft86club.com/forums/showthread.php?t=25383

Found Rear in stock 14mm size hollow Cusco
https://www.counterspacegarage.com/c...m-brz-frs-gt86

The Front Cusco ones are smaller at 16mm than 18mm but most sites say they are solid some say hollow can't confirm. Cusco site says hollow http://www.cuscousainc.com/965-311-a16.html

Would be nice to find stock 18mm in Hollow. Don't feel the need to go bigger than stock on a 300lb lighter setup with semi-stiffer coilovers and stock width tires.

Tanabe also makes hollow ones 22mm front 18 rear which might be the best bet to increase stiffness without adding weight.

Eibach also makes some huge ones. They list the stock weight at 6lbs FR, 3.5LBS Rear. So overall wont be much weight to save. Even if the Cusco ones cut the weight in half you would only save about 4.5lbs total.
https://eibach.com/us/c-262-product-...roll-kits.html Assuming Eibach's #'s are right on the stock weight I haven't been able to find anywhere else??





That's sucks for the Siebon CF no point in changing except Rice