Quote:
Originally Posted by djezlee
That was the first thing I did. The second thing I did was post here to see about troubleshooting tips. Any help you can provide with troubleshooting would be greatly appreciated.
|
Since you spoke to them, what did they say about the 12v to 6v adapter? The other issue would be a manufacturing defect on the loom with a poor connection. There are lots of places where there could be a problem. You would need to take out the loom and use a continuity tester to test the connections. Sometimes pins inside the connectors can be pushed loose. If you are pushing 12v to a 6v device, there can also be damage to the device depending on the circuitry.