Quote:
Originally Posted by TheStig85
Not going to pretend to know exactly what I'm doing, but since the P0016 is what I'm dealing with, should I replace both the Intake and Exhaust sensors for Bank 1? And/or should I buy the shim kit and see if that'll correct the problem?
|
Not enough info. Watch it working while it does so properly. Lay out your gauges so you can watch the important ones. It's safe to leave the obdlink installed. It shuts off automatically after 10 minutes of inactivity on the CAN.
What happens leading up to the CEL? What are the codes?
P0016 is bank-1 intake. Look again at the first screenshot you posted. Bank-1 intake is fine. Bank-1 exhaust is jacked. The other side is just off/disabled.
Almost forgot to wrap up by saying that I'm no expert with this system. We're all learning here. Right now I think bank-1 exhaust sensor either needs shimmed or is failing in some other way.