Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

al3k · 06-10-2018, 06:26 PM

I have ordered a T04E turbo, 50.5mm inducer / 76.0mm exducer (44trim) as a starting point.
The plan is to have a 70 000rpm motor 4kw (7kw peak performance) with a custom made axle (no couplers). This is with a 30v system which is max for that spesific motor, I might only need 24v system to achive the goal.
Made a mockup in photoshop, also tried to match the scale.
I will make a more correct sketch once the turbo arrives so I can do better measurements, also need to look into the sealing under the comp wheel.

06-10-2018, 06:26 PM	#811
al3k Member Join Date: May 2018 Drives: Audi A4 B7 2.0T Quattro Location: Norway Posts: 52 Thanks: 0 Thanked 6 Times in 4 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I have ordered a T04E turbo, 50.5mm inducer / 76.0mm exducer (44trim) as a starting point. The plan is to have a 70 000rpm motor 4kw (7kw peak performance) with a custom made axle (no couplers). This is with a 30v system which is max for that spesific motor, I might only need 24v system to achive the goal. Made a mockup in photoshop, also tried to match the scale. I will make a more correct sketch once the turbo arrives so I can do better measurements, also need to look into the sealing under the comp wheel. Attached Images Last edited by al3k; 06-10-2018 at 07:12 PM. Reason: added a better picture