Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

projek_01 · 05-29-2018, 02:36 PM

Hi guys,

Just wanted to show off the progress in my audio build.

Here is what I am looking to run
Head unit
Pioneer AppRadio 3 - Want the new 4400NEX wireless Android Auto unit when I have some cash

Processor
Rockford Fosgate DSR1

Amps
Rockford Fosgate 4 Channel PBR300X4 Driving rear fill and front dash tweeter
Rockford Fosgate 2 Channel PBR300X2 Driving midbass in doors
Focal FD 1.350 1 Channel Mono

Speakers
Front Speakers - Focal PS165 Components - Likely running active crossover with the DSP
Rear Fill - Stock for now, TBD
Sub - JL Audio 10TW1 2OHM

Front mid bass mounted in 3D printed adaptors inspired by @Shankenstein thread.

Wired in with XT60 RC car connector for quick removal and clean install.

Working on little baskets to hold the tweeters in the dash location

Also working on plug and plug connectors so I do not have to splice any of the factory tweeter wiring.

Thanks to @RandomHero, I can power the midbass and tweeters off of the wiring in the trunk without pulling new wires.

Thats all I have for now. I am currently working on sound deadening both the front doors with Noico 80 mil dampener and Noico closed cell foam. More on that later.

05-29-2018, 02:36 PM	#1
projek_01 Senior Member Join Date: Oct 2012 Drives: 1996 ST204, Series 10 FR-S Location: Calgary, Alberta Posts: 253 Thanks: 89 Thanked 207 Times in 87 Posts Mentioned: 20 Post(s) Tagged: 0 Thread(s)	projek_01's Audio Build Hi guys, Just wanted to show off the progress in my audio build. Here is what I am looking to run Head unit Pioneer AppRadio 3 - Want the new 4400NEX wireless Android Auto unit when I have some cash Processor Rockford Fosgate DSR1 Amps Rockford Fosgate 4 Channel PBR300X4 Driving rear fill and front dash tweeter Rockford Fosgate 2 Channel PBR300X2 Driving midbass in doors Focal FD 1.350 1 Channel Mono Speakers Front Speakers - Focal PS165 Components - Likely running active crossover with the DSP Rear Fill - Stock for now, TBD Sub - JL Audio 10TW1 2OHM Front mid bass mounted in 3D printed adaptors inspired by @Shankenstein thread. Wired in with XT60 RC car connector for quick removal and clean install. Working on little baskets to hold the tweeters in the dash location Also working on plug and plug connectors so I do not have to splice any of the factory tweeter wiring. Thanks to @RandomHero, I can power the midbass and tweeters off of the wiring in the trunk without pulling new wires. Thats all I have for now. I am currently working on sound deadening both the front doors with Noico 80 mil dampener and Noico closed cell foam. More on that later. __________________ Last edited by projek_01; 05-29-2018 at 03:00 PM.