|
A guy found the solution to the Version 2 problem. The issue is that the break line is divided between the 2 taillights and the 3rd break light and doesn't give enough power to the 4th break light (Valenti). Because of that the Valenti break light doesn't flash like Version 2 should. I tested the soldering by connecting the Valenti's to straight to battery and they worked like intended but when connected to break line it wouldn't flash and instead give out a dim light. To fix this I set up a relay and ran the power directly from the battery (I connected to the factory amp wire since it has a 12V always on in one of the wires). And it worked. My only issue is that the relay i have makes a clicking noise everytime i hit the breakes. So now I will need to look into getting a relay that is quite
|