[Tcoat]

Originally Posted by paintdude258

What is going on my BRZ and FRS Brotheren?

I know what your thinking, this idiot just needs to pair his window by holding down the window switch for 5-10 seconds and then repeat on the way up.

I know this process and have had great success with this process in the past, but after 3 months of repeated attempts, i am turning here for help.

I have the typical, flashing light on the passenger window switch, window valet not working and leaving the window down after anyone opens the passenger side door.

This all started when i replaced the speakers in each door. I took off both door pannels, sound deadened them, and put them both back together without issue.

Thoughts: Could the rubber window seal that the window goes into when you roll it up be causing a jam? Could a screw have come loose and caused the window itself to loose it's mounting position?

Any help will be greatly appreciated.

Thanks guys,
Balakay!

Loads of things could be going on inside there. Could have dislodged a wire, something jamming the mech, could be misaligned, etc. Only way to find out is to pull the door panel again and take a look.