No sir, just changed idle speed targets. Where can I find these fields to change? I started the car up this morning and the revs shot past 1600 rpm for a second, then dipped below 700 rpm then finally sat at around 1300 rpm. I turned the car off after a minute, turned it back on and it sat at 1400 rpm. It's a tad louder than before but i wonder why it dips like that?
Quote:
Originally Posted by tomm.brz
not cold enough relative to idle maps you have, but i suspect it s because of the maf correction after start maps
did you touch them? v4 "flats " them, you need to increase each value in the first 2 rows
maybe the idle is still not high enough, try to raise it depending on the ambient temperature you are getting now.. maybe copy stock subaru values
use the definitions steve provided to us in the first post to be able to see the maf correction after start maps
|