Quote:
Originally Posted by Strife26
Thanks guys!
I reached out to HRI and he was able to help me.
I didn't realize how sensitive it is.
You have to make sure to put the clutch pedal ALL the way down, and then put it in first, then push the throttle to 100% or it won't work. It's touchy as hell, but it does work now that I am used to how to use it.
So basically, user error here.
|
Yep
Ecutek car needs to be stationary not rolling forwards or backwards
Clutch fully depressed
Accelerator needs to go quickly to 100%, if you press it slowly launch wont engage.
It doesn't give a toss about gear as it doesn't know what gear you in, gear is calculated from speed vs rpm theirs no hardware switch. At speed =0 its all same. also with clutch in speed vs rpm is irrelevant