Quote:
Originally Posted by zizon93
I bought a clear sidemarker about an year ago from amazon and now it starts to getting really loose and pop off time to time everytime I fixed. Should I just buy new set of clear sidemarker from ft86speedfactory since they are claim that their fitment is same as OEM from factory. It's kinda expensive ($95) but if it is truly the OEM factory fitment then I might consider buy for it. Thank you in advance!
|
First off, thank you for saying loose and not lose.
Next, I used a writeup @
zeal86 wrote. Essentially you drill a hole in the plastic housing of the light then use a small gauge wire to tie a knot at that spot and run the wire to a hole off the frame. I used a wire to make a loop then I used zip ties so I could cinch it tight. It worked perfectly.