View Single Post
Old 04-24-2018, 04:24 PM   #12
ZDan
Senior Member
 
ZDan's Avatar
 
Join Date: May 2011
Drives: '23 BRZ
Location: Providence, RI
Posts: 4,672
Thanks: 1,439
Thanked 4,011 Times in 2,097 Posts
Mentioned: 85 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by rmar93 View Post
Mostly used as a DD. Im looking for even tire wear. Would you recommend your s2000 alignment setup? (-1.25 in the front and -2.25 in the back). I've read some people go with -2 in the front and -1.5 in the rear also.
-1.25 front and the -2.1 to -2.25 you have in back should be fine. You will get *some* camber wear, but it's pretty minimal and shouldn't reduce tire life hugely. And you get handling benefits, much better lateral grip with some negative camber.

-2 front and -1.5 in back would be fine as well, but IMO no reason to change what you've got, just even up the camber a bit up front.

Toe looks fine, you might consider running a bit less in back, but 0.2° total isn't excessive. It's too much toe that kills tires fast, much more so than camber.
ZDan is offline   Reply With Quote
The Following User Says Thank You to ZDan For This Useful Post:
rmar93 (04-24-2018)