[Clipdat]

Does anyone know the torque spec for the center bolt that runs through the middle and holds the Mocal sandwich plate and spacer together?

During my last oil change I must've inadvertently loosened the center bolt when I removed the oil filter. This caused a decent oil leak since there was a few mm play in the stack.

I took everything apart, cleaned it, and put it back together making sure to lube the double orings on the Perrin spacer as well as the flat Mocal gasket. I went hand tight/snug on the center bolt, but I checked it today and it's leaking again. I can slightly rotate the sandwich plate left and right so it seems like that center bolt loosened up again.

So yeah, anyone know the proper torque spec for this bolt?