Quote:
Originally Posted by tehShirt
When your shifter is rattling, does it help if you lift up on the reverse lockout? If so, tightening the set screw underneath the shift knob can help some. This helped reduce the rattle, but it never went away.
The shift boot issue was very annoying, I think removing some material below the lip could help, but I think the main issue is the outer diameter of the lip itself is too small.
|
I tightened the Allen bolt under the shift knob a few weeks ago and it helped reduce the rattle like you said, but it has not gone away. Lifting the reverse lockout seems to make a little difference but the rattle is still very much present.
As for the boot issue, I am going to try taking some material off the bottom edge this weekend and seeing if it helps. Honestly it sucks that I can’t return it (due to ordering through ft86motorsports, a Canadian distributor that has a partnership with FT86SF), but I’m hoping that if we can get the attention of FT86SF and I stick it out, we can get them to fix issues with the shifter.