Quote:
Originally Posted by pcguru2000
I don't have fog lights but wonder if the wiring already pre-exists to the red triangle. Anyone know. Before this, I thought the triangle was just a reflector.
|
So you need a few things then.
Oem fog light switch.
6” wire harness that goes from the switch to the wire harness behind the dash
Fog relay
About 25ft of wire
A universal bulb socket
A light to bulb to match said socket.
Install harness / relay / switch in the dash (all plug and play)
Then run 2 wires from the oem fog light plug (taped up under the headlights behind the bumper) all the way to the rear triangle light.
Connect those wires to the universal socket.
Drill a hole in the rear light assembly. Then insert into the triangle.
-B