Quote:
Originally Posted by steve99
If advance multiplier inital is set to 0.7 then every time you start car iam will start from 0.7, unless it was already less than 0.7.
ie if it was 0.5 it will stay at 0.5
if it was 1 it will reset to 0.7
If you find the iam is almost always 1 then you could reset iam initial in tune to 1. The lower iam initial is to accomodate lower quality fuels like 91 as their is no dedicated 91 tune
|
I just flashed my ecu on my lunch break and the car stayed at 1 IAM after the initial flash. I'll have to load up the xml in romraider tonight and check to see if the initial is at 1 or if maybe mine isn't reading right (F00D). I know before on the V2 it wasn't, and I needed V3 for it to work. I do have maf voltage on the V4 displaying properly though.