Quote:
Originally Posted by smudge
So in theory we just stick on a new TB (maybe something off an LS?) and wire it into the FBW inputs for the Motec
Thanks for confirming
|
When setting up DBW (not FBW - it's not a plane) you need the ECU to be able to operate the motor of the throttle body which will include the sensors of the plate range. The pedal just outputs a voltage range so is a sensor input as per anything else. I would assume that any decent Motec is capable of this. A cable setup is much harder to implement.
https://www.google.co.uk/search?q=se...hrome&ie=UTF-8
You could use any electronic throttle body that's the right size, the wiring is different depending on make but if you're custom wiring it anyway then it makes it easy to pick based on requirements and budget. This also gives you a better selection than cabled systems.