Quote:
Originally Posted by saikat.saha
Hello all,
My 86 has Greddy T518z Turbo kit installed and tuned by Greddy. To tune again i have to install new ecu because previous ecu is locked by previous tuner.
I have replaced my ecu with a used one which one i bought. After looping 3 and 14 pin of the OBD port and pressed 2 times the start button. I have waited for 30 mins. Then tried to start the car but its not starting, its like ignition self is trying but throttle body is not starting. What problem can be. is my new bought ecu bricked or that does not have turbo map , thats why car is not starting.
Thanks
|
If starter cranks on pushbutton start car ecu sync is good and ecu working.
may not start if map sensor or port injectors non standard on stock tune
or you have manual car with auto ecu calibration or other way round