|
1st and 2nd gear not working after clutch replacement
So I just did a full oem clutch kit install on my 2013 FRS because my throw out bearing was shot. Bolted everything back up started the car up everything was fine. Took the car out for a drive and didnt go too well. For some reason where 1st gear is supposed to be is now acting as reverse. I am also not able to go into 2nd gear as if there is something blocking it from going into gear. Good things are reverse gear is fine, 3rd,4th,5th and 6th are also acting normal although i did not go into 5th or 6th when test driving but i assume they are ok. I am thinking there is something wrong with the linkage but not sure how the linkage could have messed up from a simple clutch replacement. Any ideas of what this could be? Any responses are greatly appreciated!
Sent from my SM-G930P using Tapatalk
|