Quote:
Originally Posted by conedodging
This setup is from Annie's twin from 2014 or so. She told me 6" in the front, and 7" in the rear. They are also using the stock kw helper springs.
Now I'm tempted to get another set of 7" and just run that all the way around...
|
I think the reason shorter springs are sometimes used on the front is the lack of shock body length available for threading due to the knuckle mount.
I got a different set of springs to try this year and ordered what I thought was right based on the size I was told to get, and they're longer than the ones that came on my coilovers... Of course, those weren't original so I have no idea what stock spring length actually was.
I haven't put the car on the ground, but I'd guess it will sit about as low as it did on the old springs and there's still some room to go lower... I actually lowered the perches 30mm, and the official height difference should only be 26mm so I probably have to go up. I expect to be doing a bunch of adjusting anyway.