Quote:
Originally Posted by new2subaru
Maybe they were out of B6's  |
Haha maybe. He did repeatedly say B6's were designed for the OEM spring only, and that: 1) there was a chance, however small, that a shorter-than-OEM spring would not remain fully captive and seated on the B6; and 2) that I'd be giving up some compression travel using the B6 with a shorter spring vs. using the B8 with that same spring.
I never found the RCE Tarmac/B8 combo to have a lack of droop. I wish my current setup had anywhere near the amount of the droop that the Tarmacs & B8s have.