Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

zeal86 · 02-20-2018, 07:09 PM

Got some sanding, filler, and bondo work to do now...

Filled in the notch since I'm going to attempt to lengthen the gas cap door catch. I plan on bending some .050" aluminum to mimic the shape of the OEM catch. I'll rivet the extension to the OEM catch. Doing this will afford me the use of the OEM gas cap door release.

If plan is a no go, I'll still do the Quick-Latch method. Either way... the notch gets filled.

__________________________________________

Instagram @zeal.eightsix

zeal.eightsix Facebook

02-20-2018, 07:09 PM	#1055
zeal86 Senior Member Join Date: Jul 2014 Drives: Posts: 2,000 Thanks: 1,156 Thanked 1,895 Times in 908 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	Got some sanding, filler, and bondo work to do now... Filled in the notch since I'm going to attempt to lengthen the gas cap door catch. I plan on bending some .050" aluminum to mimic the shape of the OEM catch. I'll rivet the extension to the OEM catch. Doing this will afford me the use of the OEM gas cap door release. If plan is a no go, I'll still do the Quick-Latch method. Either way... the notch gets filled. __________________________________________ Instagram @zeal.eightsix zeal.eightsix Facebook