|
I have no experience with replacement studs for these cars so I don't know what will be best for you.
However, I've worked in a garage as a mechanic in the past and it is fairly easy to replace studs.
To remove the stud you can hammer it out. Once it is out, you will see that the splines don't actually line up with anything, they just grab into the metal and keep it from spinning when installing and removing the lug nuts due to the stud's splines being only slightly bigger than the hole the stud goes into.
To install the new stud your best bet would be to use another nut that has the same threads with a flat side on it so that you don't damage the angle on the lug nuts that is designed to match the rim by torquing it down against the flat surface of the hub.
|