Quote:
Originally Posted by Soloside
depends on tune. 250 is very conservative for the greddy kit.
I ran 20k Miles on greddy's t620z turbo pushing 11lbs with no issues (~290-300whp)
|
Correct the blocks can handle +500hp. But it totally depends on tune and pressures and compression ratio. I would drop your compression and install the turbo. Then tune it. I have seen so many do it wrong and blow the engine and have a dumb look on there face and say well these engines are cheep. When they were running 25lb psi and put there foot down and didn’t bother changing the compression booom.
But yes if you do it right and conservative 250 is vary achievable just have someone you trust put it in.
