View Single Post
Old 02-07-2018, 04:57 PM   #51
HeresMyMind
Senior Member
 
HeresMyMind's Avatar
 
Join Date: Oct 2017
Drives: 2013 WRB BRZ Limited
Location: CT
Posts: 348
Thanks: 33
Thanked 167 Times in 94 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Just picked up a '17 860 SE and have a few lighting questions:

On my previous car (RX-8) there was a quick wiring mod that allowed the fogs to turn on with the parking lights (instead of just with the headlights), know if there's a similar mod for the 86? They're the new LED fogs.

Unfort Unless you install a seperate wire harness I don't know hwo to do this on our cars, it looks like it is programmed in the main ECU

Similarly, any known way to keep the DRLs in bright mode (for sure when the e-brake is on, possibly when the lights are on... not sure how bright they are at night because I can't put my e-brake on, get out and look at them). lol

You can buy an Always on Boomerang harness that dims the main running lights when you turn on your other lights but you can cut the wire that dims them

And finally, I'd like to convert the front side marker to a side repeaters (another mod I did to the RX-8). Since I have the new LED front signals, I'm not sure if I can just tap into a wire like I would with a incandescent bulb. Any idea what wire to tap if so? Or where to find the headlight wiring diagram?

You can install a these: https://www.customled.com/products/b...RoC-ewQAvD_BwE

Thanks.
HeresMyMind is offline   Reply With Quote