Quote:
Originally Posted by killsafkat
So basically i have already got some JBL 2 way component speakers for the front, a couple of 4 inch speakers for the rear and subwoofer, now i am still deciding on the headunit. I have a mono amp to power the sub woofer, and i have a 4ch amp laying around (can be used for the front speakers if needed). now please suggest me a way i should go about hooking all this up and getting the best out of it.
Thanks.
|
I ran into the same dilemma. How to wire the six speakers and four channels. (not including the sub)
First of all I replaced all the speakers and CD player. I ran the CD player to the four small 4" speakers. I Unhooked my OEM amp. And installed a 4-channel amp with two channels run to the door speakers and the other two channels bridged to my 10" sub.
If I had your equipment: I would hook the CD player to the backseat speakers. And hook the front speakers to the 4-channel amp. The mono amp of course gets hooked to the sub.
My $0.02