Quote:
Originally Posted by Chimera
This would drop the ohm load below the acceptable level for head unit power and would certainly damage the unit. The front comps (dash) are 2ohm together
http://www.bcae1.com/spkrmlti.htm
If you got a set of new speakers with a passive crossover this changes how powers distributed, but if you just bypass the oem amp you will certainly fry a head unit, possibly risk a fire |
So basically i have already got some JBL 2 way component speakers for the front, a couple of 4 inch speakers for the rear and subwoofer, now i am still deciding on the headunit. I have a mono amp to power the sub woofer, and i have a 4ch amp laying around (can be used for the front speakers if needed). now please suggest me a way i should go about hooking all this up and getting the best out of it.
Thanks.