Quote:
Originally Posted by ermax
It does both actually. The spring expands pressing the pedal up. Then as you press down on the pedal it compresses the spring until it pivots into the other direction and then starts expanding again helping press the pedal the rest of the way to the floor.
Perfect solution would probably be a replacement spring that has enough force to hold the pedal up but not enough to assist (mask) the pressure plate.
|
Ok, that make sense thanks.
Mtec make a replacement spring that has a lot less force, but still more than no spring at all.
http://www.ft86speedfactory.com/mtec...ring-1839.html