|
so of you want the existing red light on the door to light up following that video. the only difference would be installing a 12 volt led bulb inside the existing light housing. yes I would use a white bulb. the lens is red so it will shine red. I would take the door card out before you start to see what you will need to do to properly install a bulb in the housing. It should be easy because on some cars it really does have a bulb in it. the only other thing I would do different from the video is I would run the wires behind the plastic and have them come out near the light. I would buy a male and female two pin socket and wire it so you can unplug the light when you remove the door card just like a factory install would be.
I may do this mod to my car.
|