[Strife26]

Originally Posted by humfrz

That's OK, sometimes my "funnies" aren't funny to anyone except me .....

Sounds like you have been battered up by the internet before .....

So, your plugs, in the box, are set at a 0.032" gap.

As @Ultramaroon suggested and I concurred, that that gap would be fine for your engine [with modest boost]. Here is a reference:

BTW, that's a neat bridge ya'll have there in Redding ...... I enjoyed walking across it.

Have a good weekend.




humfrz

I went and grabbed a better tool from Napa. I guess the coin type shouldn't be used (mfker too late, damnit). So on the coin it read around .032. The filler type had them above 25 so probably .032. I was able to get them down. Was a little scary because they're so sensitive.