Quote:
Originally Posted by humfrz
hmmmm........comments/questions:
I've never had a spark plug "back out" on anything ....... 
Codes ...... have you checked with a code reader or just no codes showing on the dash .. ??
Are you going to drive the car between now and Monday ..... except to the dealer .. ??
Keep us posted.
humfrz |
I've never had a spark plug back out either, but it was easy enough to check and hope for an easy fix.
I'm not driving the car between now and Monday. I'm getting it towed to the dealer since I still don't know the actual cause.
I just plugged in my Ecutek and used the DTC tool to verify there were no stored codes.
On the side note of doom and gloom..
There was a YouTube video I ran across where the guy had a rod/bearing issue. One of his comments "Ended up being a spun Rod 4 Bearing, apparently it wasn't out of the normal on the early first batch engines due to a front oil valley cover issue (passages too narrow or something along those lines). I got a replacement engine under warranty and it was fine ever since. The early engines have a #1 with an eagle looking logo stamped on the front cover, revised front covers have a #2 with no eagle. Sure they've done more revisions since then."
I looked at my cover and I found the eagle and I found the #1 on it
