12-30-2017, 11:05 PM
|
#37990
|
|
not playing cards
Join Date: Sep 2014
Drives: a 13 e8h frs
Location: vantucky, wa
Posts: 32,395
Thanks: 53,053
Thanked 37,228 Times in 19,308 Posts
Mentioned: 1118 Post(s)
Tagged: 9 Thread(s)
|
My Review Of the JDM Underbody Panel Kit sold by FT86SF
Ups: Fits perfectly.
MUCH quieter ride. Surprisingly effective.
5 MPH gain in top speed. (not really)
Downs: Shipped with standard 8 mm hex nuts when factory uses locking flange nuts. I added my own washers and tightened gently over plastic parts using blue loctite.
Needs 3 mm-tall spacers or new screws with taller shoulders for the six forward-most shoulder screws. Fully tightening the originals over a double layer of fiber board will destroy the boards. I also finger-tightened these after applying blue loctite.
|
|
|