Quote:
Originally Posted by etc
With all this said there is one minor downside, the pad will actually hang 5mm off the outside of the rotor. My pads, carbotech xp8s, are 9.9mm and the rotor is 20mm thick so even if I went to the metal on both pads they still wouldn't touch, yes you are wasting some pad but it is in the rear and in my experience these last a long long time so I am not so worried but be warned.
|
Hey, I'm about to purchase the parts for the front and rear upgrades.
On the rear rotors, if I just slotted the holes on the mount for the calipers about 5mm, allowing the caliper to sit lower on the disk, would I have any other issues with clearance?
Aka, is there anything else in the way stopping the caliper from dropping 5mm or does it just mount a bit too high?
Thanks man, you the brake king.