|
So im thinking about trying to mess with this after work today.
Heres what im planning:
Cut the grey wire on its own plug and ground that to pin 7 on the 10 pin plug.
this should get me around the ebrake, now I need to get around the VSS
For this I will grab pin 17 on the 28 pin plug and run it to a rocker switch, with this I will be able to cut the VSS signal, allowing me to type in an address/use my phone, then flip the switch back allowing my gps to continue to be accurate.
From what I gathered this sounds like the only way to do it until someone finds a pin allowing us to get around this a different way.
Any other input? other things I should try while im back there?
|