Quote:
Originally Posted by Ultramaroon
It's not the only way but it's the best way. The forward main galley plug is super tight. I bought a second set of accurately-ground socket head drivers just for the plug. The bit stored up so much spring energy that the breaker smacked my hand when the plug let go.
I can easily picture stripping the head.
|
Very interesting. Will need to watch out for that. I have already read somewhere on the forums that the gallery plug has white loctite on it. When putting the adapters on, would I be required to put loctite on again. If so, any specific one? Or should I use teflon tape to stop any leaks?