Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - DIY:Valenti 3rd/4th Brake Light Mod-Separate Brake light Triangle-2 Options -Video

FRStevan · 11-22-2017, 04:44 PM

@continuecrushing not sure if this thread is still alive but,

I wired up my 4th light for the V to be alone and for the triangle to flash when braking (following the instructions from the video). However what happens is when I turn on my lights the triangle flashes and stays on without hitting the brakes, and the V does not light up at all. I'm not sure if this is a bad soldering job on my end (I did use a crappy older one), or if I fried one of the nodes.

Wondering if you have any input or advice. Thanks.

11-22-2017, 04:44 PM	#36
FRStevan Member Join Date: Apr 2017 Drives: 2013 Scion FRS Location: Hamilton, Ontario, Canada Posts: 65 Thanks: 9 Thanked 6 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	@continuecrushing not sure if this thread is still alive but, I wired up my 4th light for the V to be alone and for the triangle to flash when braking (following the instructions from the video). However what happens is when I turn on my lights the triangle flashes and stays on without hitting the brakes, and the V does not light up at all. I'm not sure if this is a bad soldering job on my end (I did use a crappy older one), or if I fried one of the nodes. Wondering if you have any input or advice. Thanks.